Buell 2004 XB9S, Руководство по обслуживанию

Страница: 296 / 597

2004 Buell Lightning: Engine 3-93
HOME
3. See Figure 3-136. Place flywheel assembly in FLY-
WHEEL SUPPORT FIXTURE (Part No. HD-44385). Pull
sprocket shaft bearing inner race with WEDGE ATTACH-
MENT for CLAW PULLER (Part No. HD-95637-46A) with
BEARING RACE REMOVER/INSTALLER (Part No. HD-
34902B) and END CAP (Part No. HD-34902-7).
NOTE
Left main bearing inner race does not need to be ground
once it is installed on the sprocket shaft.
4. See Figure 3-137. Remove left main oil seal retaining
ring.
5. See Figure 3-135. Remove left main oil seal (2) from
crankcase using Snap-On Tool (Part No. CJ 114, Body
Dent Puller)
6. Remove outer thrust washer (4) next to left main bearing
(6).
7. See Figure 3-138. Remove left main bearing retaining
ring from the inside of the left crankcase half.
8. See Figure 3-139. Using CRANKCASE BEARING
REMOVER/INSTALLER with ADAPTER (Part No. B-
45655, HD-42720-2 and HD-46663) press left main
bearing out of the left crankcase half.
NOTE
The bearing presses to the inside. There is a shoulder incor-
porated into the left crankcase half which allows the bearing
to be removed in one direction only.
Figure 3-136. Removing Sprocket Shaft Inner Bearing
Race
Figure 3-137. Left Main Seal Retaining Ring
8760
8861
Figure 3-138. Removing Left Main Bearing Retaining Ring
Figure 3-139. Direction of Bearing Removal
From Left Crankcase
8762
8790