Budget Robotics - TankBot Servo
Page 5
Copyright (c) 2002-2006, Budget Robotics
Step 3
Secure three small rollers from
the Tamiya Track and Wheel set
to the left rail using 4-40 x 1"
machine screws, washers, and
locking nuts (see the figure inset
for fastener assembly).
Note that the washers, which are
brass color, are undersized, and
may need to be threaded onto the
machine screws.
Hand tighten the locking nuts
only at this point.
Step 4
Secure one large roller from the
Tamiya Track and Wheel set to
the left rail using a 4-40 x 1"
machine screw, washers, and
locking nut (see the figure inset
in Step 3 for fastener assembly).
As with the small rollers in Step
3, only hand tighten the locking
nut.
