Budget Robotics - TankBot Servo
Page 3
Copyright (c) 2002-2006, Budget Robotics
Assembly Steps
Step 1
Identify the "right" and "left"
track rails. The "left rail" is the
rail on the left, as viewed from
the rear of the TankBot. Its three
base mounting holes are
countersunk on the left side.
The "right rail" is the rail on the
right, as viewed from the rear of
the TankBot. Likewise, its three
base mounting holes are
countersunk on the right side.
Orient one servo in the servo
mounting pocket of the left rail,
as shown.
