BuckMaster AIR-TIGHT, Инструкция по установке и эксплуатации

Страница: 6 / 31

4
CLEARANCES TO COMBUSTIBLES
HOT AIR DISTRIBUTION
The high BTU output of the BuckMaster fireplace makes
it an excellent heat source. The diagrams on page 8 and
9 show different duct systems that can be used to heat
one or more rooms in your home.
CHIMNEY CONSIDERATIONS
1. Any UL-103 (HT-2100 degree) type HT, or ULC-
S629 (in Canada) factory build chimney system may
be used.
You may connect to a masonry chimney as long as the
conditions in section 8 4.5 of NFPA 211 are met. The
connector from the flue outlet of the BuckMaster and the
masonry chimney must also meet UL 103 type HT
requirements, unless the connector is visible from within
the room and a minimum clearance to combustibles of
18" (460mm) is maintained.
2. Do not vent any other appliance through the
fireplace chimney.
IMPORTANT: CAREFULLY REVIEW
C O M P L E T E I N S T A L L A T I O N
SECTION BEFORE BEGINNING ANY
ACTUAL WORK.
TYPICAL INSTALLATION