4
7.
Ensure the Inner Strap is oriented correctly, without any twists. The snap hook gates MUST face outward. Ensure the
WebGrab is oriented correctly with the arrow on the frame facing the permanently attached snap hook end of the
Inner Strap (Fig.31).
8.
The Inner Strap WebGrab can be reassembled by following the instructions above beginning at A.7.e. through A.7.i.
9.
Connect the Serrated RotoSnap to the WebGrab on the Outer Brown Strap.
10.
The final assembly should be as shown in Figure 31.
It is imperative that a trial test while standing on the ground be
performed to ensure the SuperSqueeze is functioning properly prior
to climbing.
Patent Pending
BUCKINGHAM MFG. CO.
BINGHAMTON, NY
www.buckinghammfg.com
1-800-937-2825
Web site
–
Information contained in these written instructions supersedes all other information (written, audio, video etc.) produced by
Buckingham Mfg. prior to the revision date of this document.
Fig. 31
Snap gates MUST
Face outward
488 OUTERSTRAPREPL.INST
P/N: 230299, Rev._12/20/17
