background image

- 1 -

DR-04W

Hermetic motion sensor (PIR), 

white

The motion sensor is used for automatic and temporary swit-

ching on of lighting if a person or other object appears in places 

such as hallways, courtyards, driveways, garages, etc.

The sensor detects the infrared radiation sources. It analyzes the 

parameters such as the size of the object, the amount of heat 

emitted and the speed of movement between sectors of detec-

tion. Movement in the detection area will automatically switch 

on the lighting. From this moment the light will stay on, as long 

as the sensor detects continuous movement. Only if there is no 

movement in the detection area triggers the lighting support 

time. Another movement in the detection area and its subsequ-

ent disappearance in the course of time measurement starts the 

support time from the beginning. 

The specific of operation al-

lows using the DR-04W as a presence sensor.

 The motion sensor 

is equipped with a twilight sensor to prevent switching on the 

lighting during the day. The detection status and the readiness 

Purpose

Functioning

F&F Filipowski L.P.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collec� on, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Содержание DR-04W









Отзывы: