Buckeye RC-5000 Скачать руководство пользователя страница 38

Страница: 38 / 40

BuckEye Cam

- Wireless Camera System

Questions? Contact us at [email protected] or call (866) 325-8172

18. Antenna & Cable Care Guide

•

Do not mount the antenna to a metal pole. This can
negatively affect the antenna’s performance.

•

Do not hold the antenna while trying to get a signal.
Your body can nullify the antenna’s effectivenss.

•

Painting the antenna can drastically reduce the effec-
tive range of the antenna.

•

The antenna manufacturer recommends grounding
the antenna. Electrical damage casued by a lack of
grounding is not covered under warranty.

•

Avoid pinching the cable in doors or windows. This
can damage the cable internally and cause communi-
cation problems.

•

When using a wrench to tighten the antenna cable
connectors, take care to avoid damaging the cable.

•

Keep in mind the location where the connector at-
taches to the cable is the most vulnerable to damage.

•

Cables and Antennae that are damaged due to abuse
are not covered under the warranty.

19. Replacement Parts

Replacement parts and optional accessories can be
purchased via our website at www.buckeyecam.com
or by calling (866) 325-8172.

20. How to Contact BuckEye Cam

If you have any questions while using your BuckEye
Cam

System, you can contact us via any of the following:

E-mail: [email protected]

Website: www.buckeyecam.com

Telephone: 1-866-325-8172
Monday through Friday - 8:00 am–5:00 pm E.S.T.

Содержание RC-5000









































Результаты поиска

Содержание RC-5000

Отзывы:

Похожие инструкции для RC-5000

Бренды по названию

Популярные бренды

Buckeye RC-5000, Руководство пользователя

Результаты поиска

Содержание RC-5000

Отзывы:

Похожие инструкции для RC-5000

Бренды по названию

Популярные бренды