Buck BUCK-Libra Plus LP-5, Инструкция по эксплуатации

Страница: 9 / 12

16 16
A/C Power Supply (continuous sampling)
The Standard Battery Charger for BUCK pumps, will supply
enough power to operate the Libra Plus Pump continuously while
sampling. Simply plug the charger into the battery pack into 120
VAC outlet and turn the pump on to sample.
Interchangeable Batteries
The BUCK-Libra Series incorporates a unique system of inter-
changeable batteries to provide additional flexibility in sampling.
A Triple Pack is available for extended run times. All run times
are tripled from those stated for a single Standard Pack.
Battery Pack
The BUCK-Libra Series Standard Battery Pack consists of four
nickel metal hydride batteries. The batteries are rated at 2150mA
hour capacity. The QuickOne™ and QuickFive™ Battery Chargers
connect to the back of each battery case; by lifting the protective
rubber cover, the charger lead can be easily inserted. A Triple
Battery Pack may be substituted for the standard battery pack to
provide three times as much battery capacity for the Libra Plus.
When a Battery Pack or pump with Battery Pack is connected to a
BUCK QuickOne™ or QuickFive™ Charger, a yellow LED
(CHARGING) will indicate the charging cycle has begun. The
charge cycle takes approximately one hour for the single packs
and 3 hours for the triple packs. When the charging cycle is
completed, a green LED will light (READY) indicating end of cycle.
Individual battery packs may be charged independently of the
pump if required. The pump may be left connected to the charger
in “trickle charge” indefinitely. Battery pack cases are connected
to the pump case bottom with four self-retaining screws.
Caution: Never charge batteries in hazardous areas.
9 9
Section 4