background image

10 

10 

  

Section 4  

15 

15 

  

Section 8 

           BATTERY CHARGERS and A/C Power Supply 

Note:  The BUCK QuickOne™  and QuickFive™  Battery 
Chargers are designed to charge only the Nickel Metal      
Hydride (NiMH) battery packs for the BUCK-Libra Plus 
Pumps. 

BUCK QuickOne™ and QuickFive™ Battery Chargers Description 

The BUCK QuickOne™  and QuickFive™  Chargers are microproc-
essor-controlled battery chargers providing an entirely automatic 
battery charging cycle in approximately one hour.  The pump bat-
tery pack can be recharged with or without the pump connected.  
When inserting the charger lead into the battery pack socket, first 
lift up the protective rubber cover.   The charger uses a voltage/
temperature detection technique that provides a full recharge.  
When plugged in, the Yellow and Green LED light to indicate the 
microprocessor is functioning and the charging cycle is in 

 

 

 

 

 

 

 

progress (“Yellow”) and finished or ready (“Green”). 

The QuickOne™ and  QuickFive™  Chargers  will  charge  a          
completely discharged pump battery in one (1) hour.  Three (3) 
hours for the optional Triple Pack with a fully discharged pack.
  
After a full charge, a trickle charge cycle (“Green” LED) will begin.  
Batteries may be left in trickle charge indefinitely. 

The charger is designed to operate from a 100 - 240 VAC.  The 
charger begins operation automatically when plugged in to an AC 
source. 

Operation 

When plugged in, the “Charging” light will indicate Yellow (ON).   
When the green light turns ON and Yellow turns OFF, the batteries 
are fully charged.  

Standard Charger  

The Standard Charger is designed to charge the BUCK PUMP 
NiMH battery single pack in 16 hours.  The connection is made 
through the same charge port on the rear bottom of the battery 
pack.  The RED LED light on the A/C charger will light.  After 16 
hours, the pump batteries will be fully recharged for portable     
operation. The battery pack can be charged either on or off the 
pump. Note: The Standard Charger is not recommended for the 
Triple Packs. 

Содержание BUCK-Libra Plus LP-5













Отзывы: