Buchla 200e series, Руководство пользователя

Страница: 57 / 78

Here we use a voltage to control the proportions of two inputs that are applied
to the transform matrix. The output starts at 8 volts, for an applied input of 0
volts, has a negative peak of 0 volts when the input reaches 2 volts, and then
goes to 10 volts as the input reaches 10 volts:
Note that the low resolution display provides a rough but useful indication of
the transfer function. The actual voltages are calculated to a high degree of
precision, and are appropriate for application to pitch and other variables.
Switch status and pot settings of the 256e can be locally stored and
subsequently recalled by the model 225e preset manager.
To connect or disconnect this module from the central library function, push
the remote switch. A lighted LED signifies a connection.
Note that this module has two computers; when downloading or checking
firmware, use the breakpoint switches A and C instead of the remote enable
switch.