Buchla 200e series, Руководство пользователя

Страница: 24 / 78

programmed that appears at the blue jacks. Alternatively, the blue jacks may
present location – turn the data knob to the extreme left to access location.
The bottom row of jacks provides access to Location, Pressure, or Impact
from individual keys. Each output can respond to a single key with Location,
Pressure, or Impact. Use the cursor key to select the data field and the data
knob to select the data type (L, P, or I) and the key identifier.
The next page allows the display contrast to be adjusted for optimal viewing.
Pick a number between 0 and 7.
The 222e can implement polyphony by stealing radio outputs. Page to:
Polyphony off
Use the data entry knob to select from two to four voices. The display will
indicate which of the radio outputs have been “stolen” for application to
polyphony. These pages will become unavailable for editing, because they
will use the parameters from radio output 6. Their outputs will be used to
implement polyphony.
The final page allows us to determine the effect of the two small keys located
on the upper left and the upper right corners of the keyboard. The status of
these keys determines whether the rings are engaged or not.
L:Sustain rev
R:Toggle
The keys can be switched from the toggle to the sustain mode, and thus
determine the effect of the rings. If the R (of rev) is capitalized, then the effect
of the keys is reversed, with the left key controlling the right ring, and the right
controlling the left. All of which brings us to the: