btsr SMART KTF 2000, Руководство по эксплуатации

Страница: 42 / 145

SMART KTF 2000 – KTF/100HP Operation
3A-22 SMART KTF 2000
SENSOR TEST - KTF/100HP Device Test
SETUP CONFIG TEST SENSOR
This function gives you the possibility to check the dialogue between the SMART
KTF 2000 terminal and (one by one) each of the connected KTF/100HP devices.
In this way it is possible to check that:
All devices are correctly numbered and identified
All devices respond correctly to the terminal
The same number has not been assigned to more than 1 device.
This function is particularly useful during the testing phase (immediately after
installation) and when operation problems occur, which require a test of each
individual device.
The test does not show diagnostic messages on the SMART KTF 2000 display!
The operator shall simply select the number of the desired device (DEV XXX) by
using the NEXT CY button and confirm that the
OK
and
COM
labels of the
selected KTF/100HP are flashing.
Once you have selected the > TEST CONFIG screen, press to access the
function.
This screen indicates that the device test is going to start.
Press to continue.
DEV XXX indicates the device which is being tested
(initially device no. 1).
Check that the
OK
and
COM
labels on device XXX are flashing and that there are
no other device with such labels flashing.
If the
OK
and
COM
labels on KTF/100HP device that should respond to the
number XXX are not flashing, it means that the device is faulty or that the
device numbering procedure has not been performed correctly. In this case try
to renumber the devices (see: DEVICE - “Numbering the KTF/100HP
Devices”) and, if required, replace the device.
If the
OK
and
COM
labels are flashing on more than one device, it means that
the same number has been assigned to multiple devices. In this case it will be
necessary to repeat the device numbering procedure (see: DEVICE -
“Numbering the KTF/100HP Devices”).
Press to select the next KTF device and check that the
OK
and
COM
labels
on that selected device are flashing.
Repeat this test for all connected KTF devices.
Press once to leave this function and return to the >TEST screen, or press it
several times to return to the Main Menu.