7. Installing the battery
1.Turn off the meter by pressing
“M” button and hold for 2 seconds
before replacing the batteries.
Slide down the battery cover on
the back of the meter by pushing
the cover in the direction of the
arrow and put the cover aside.
2
.
Remove the two used
batteries
.
3.Insert 2 new batteries with
correct
＋
/
－
direction
.
(
Battery
:
AAA 1.5V 2 Alkaline 24A LR03
)
4.Put the battery cover back in
place by pushing the cover in the
opposite direction of the arrow to
close the cover into position.
11
Note:
1.I
t is suggested that batteries need to be replaced when the battery
icon appears empty. If you keep using the meter, the battery icon
will start flashing and an error message E_3 will appear on the screen.
2.N
ote that replacing the battery will not reset the stored testing results
.
3 .
You need to reset the time and date after the batteries are replaced.
4 .I
f there is any unexpected symbol on the display, please follow the
above procedure to replace the batteries again.
5.Please dispose of batteries according to your local ordinances.
1
2
3
4
