manualshive.com logo in svg

Bticino terraneo, Руководство по установке

Поделиться
Скачать
Bticino terraneo Скачать руководство пользователя страница 22

Digital system

22

2.3 ALARM SIGNALS

2.3.1 Signals from IU

The porter Switchboard can receive 3 types of alarm from the apartments:

PANIC ALARM           this signal has priority over all other Exchange functions. When there is

a panic alarm the Exchange can only call the IU which has generated
the alarm, cancel the alarm or receive a new panic alarm signal.
Any calls from IU and alarms from common parts or apartments are
put in the call queue.
When programming (see sect. 3.5.6) management of this alarm can
only be enabled or disabled globally.

When the Exchange receives a panic alarm (

depending on the call mode

) the following

message is displayed:

The alarm (

acquisition)

 can be cancelled with the 

can

 button and typing the 

password

.

Panic alarms which have not yet been acquired (whether silenced or not) are saved in the alarm
queue. The management of this queue is similar to the pending call queue, except that cancelling
an alarm requires knowledge of the password.

TECHNICAL ALARM  this signal has priority over the IU call signals. When programming

(

see sect. 3.3.1

) the name which identifies the alarm must be associated

for each auxiliary channel to be dedicated to this function.
The name programmed is shown associated with the indication of the
IU giving the alarm on the Exchange display when the signal is given.

When the Exchange receives a technical alarm (

depending on the call mode

) the following

message is displayed:

The alarm can be 

silenced

 with the 

ok

 button.

The alarm (

acquisition)

 can be 

cancelled

 with the 

can

 button and confirming with 

ok

.

or

or

Содержание terraneo

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды