5/15
ELIOT Kit Salvavita Connesso
Cat. N°: G723SC
4. PREPARATION - CONNECTION
(continued)
Recommended tools:
. For the terminals of the Salvavita Connesso: flat screwdriver 3,5
mm.
. For the terminals of the Supply modules: Pozidriv n°1 or flat
screwdriver 4 mm.
. For fixing: flat screwdriver 5.5 mm (6 mm maximum).
Conductor type:
. Copper cables
. Salvavita Connesso
Without ferrule
With ferrule
Rigid cable
1 x 2,5 mm²
2 x 1,5 mm²
-
Flexible cable
1 x 2,5 mm²
2 x 1,5 mm²
1 x 2,5 mm²
2 x 1,5 mm²
. Supply module
Without ferrule
With ferrule
Rigid Cable
1 x 1,5 mm²
2 x 1,5 mm²
-
Flexible Cable
1 x 1,5 mm²
2 x 1,5 mm²
1 x 1,5 mm²
2 x 1,5 mm²
Kit assembling:
1. - 2. Connect Power supply module and Wi-Fi interface with the
250 mm Supply patch cords.
3.
Connect Wi-Fi interface and Salvavita Connesso with the pre-
cabled 1 m length cable in the dedicated port of the Salvavita
Connesso.
Note: the length of 1m allows to clip the Wi-Fi module (and the power
supply) on a different DIN row, than the Salvavita Connesso module.
4. PREPARATION - CONNECTION
(continued)
On site information displayed by the Salvavita Connesso:
Salvavita Connesso lockout:
. By the sliding front face.
Sliding front face downward: the associated device goes into OFF
position and manual or automatic closing operations are disabled.
Sliding front face upward: the device is operating.
. Lockout by padlock Φ 4mm, only when the sliding front face is down.
Then mechanical and electrical controls are not possible.
Display of the device status and the status of the contacts of
the associated device:
. By handle mark:
“O-Off“ white on a green background = device switched-off and
contacts opened.
“I-On” white on a red background = device powered-on and
contacts closed.
Device handle status:
. The handle of the Salvavita Connesso, consists of two parts:
- an “isolating” handle
- a “power” handle
. Operation sequences:
- “Normal situation”: both handle upward.
The Salvavita Connesso can be remotely controlled via the
Smartphone app
Technical data sheet: IDP000172EN_01
Updated: -
Created: 08/09/2017
Isolating handle
Power handle
Isolating handle
Power handle
