4/15
ELIOT Kit Salvavita Connesso
Cat. N°: G723SC
4. PREPARATION - CONNECTION
(continued)
List of possible associations:
. BTDIN 2P RCCBs
. BTDIN 2P RCBOs (2 poles protected or P+N, 1 pole protected)
. BTDIN 2P MCBs (2 poles protected or P+N, 1 pole protected)
Association Salvavita Connesso - Protection device:
. To be fitted to the left of 1 module per pole wide BTDIN
RCCB’s 2P
or BTDIN
RCBO’s ≤ 10000A (1P+N et 2P ≤ 63 A)
. No tool required. Clipped to the associated device by mean of
plastic clamps.
Wiring diagrams:
. Salvavita Connesso
Note: It is not necessary to install a specific protections upstream of
the Salvavita Connesso because it is self-protected
4. PREPARATION - CONNECTION
(continued)
Wiring diagrams
(continued)
:
. Power supply module:
protected by an MCB:
protected by a Fuse holder:
Connection:
. Terminals protected against accidental contact (IP20, wired devices).
Terminals:
. Salvavita Connesso
Terminal depth: 8 mm.
Stripping length: 8 mm
. Supply module
Terminal depth: 8 mm.
Stripping length: 8 mm
Screw head:
. Salvavita Connesso
Slotted, diameter 3.5 mm
. Supply module
Mixed, slotted and Pozidriv n°1 (UNI7596 type Z1).
Recommended tightening torque:
. Salvavita Connesso
0,4÷0,5 Nm.
. Supply module
1 Nm
Technical data sheet: IDP000172EN_01
Updated: -
Created: 08/09/2017
