Bticino 391780, Быстрый старт

Страница: 65 / 93

65
IP Speed Dome Ext.
Q
uick S
tar
t Guide
4.4 Corner mount bracket installation
Corner mount bracket and its components are shown as below.
Installation requirements
The corner mount speed dome can be installed in the hard construction wall in the indoor or outdoor environments
where there is a 90 degrees angle.
Before the installation, make sure:
- The wall is thick enough to install the expansion bolt.
- The wall can at least sustain the 4x weight of the speed dome.
Installation steps
- Draw four holes position in the wall according to the holes of the corner installation accessories.
- Dig four holes and insert the M8 expansion bolts.
- Pull the cables through the centre hole of the bottom of the corner bracket, the waterproof adhesive, and the centre of
the bracket.
- Reserve the enough cable connection length and then use the M8 expansion bolt to secure the corer mount bracket
chassis on the wall.