U
ser
m
an
ual
4-camera PAL AHD DVR
8-camera PAL AHD DVR
16-camera PAL AHD DVR
35
Step 1-8: Select which camera is to record when movement is detected by checking the corresponding box.
Step 1-9: Define the recording time after movement has been detected in the “Post Recording” dropdown menu.
(Note 1) Configuring a detection area
- Click on “Setup” in the “Area” line. Red blocks representing the activated detection areas appear over the image. By
default, detection is active over the whole of the image.
- Click on the blocks to activate or deactivate detection.
- Right-click to return to the previous screen.
- Click on “Save” to confirm.
- Click on the “Cancel” button or right-click to return to the main menu.
- Right-click to exit the main menu.
Notes:
- When a camera detects a movement, recording can be on that camera, another camera or all the cameras.
- These steps must be carried out camera by camera or can be copied by clicking on the “Copy” button in the “Copy”
line.
Step 2:
Record when movement is detected
Step 2-1: Click on the button in the taskbar to go to the main menu.
Step 2-2:
Click on the “Parameter” button then “Record”, then “Record Schedule”
Detection area activated over the whole image
Detection area deactivated over part of the image
Содержание 391 115
Страница 67: ......