36
3.1.1. LIST OF AUTHORIZED USERS: CONFIGURATION
*1 # ID # conf1 , conf2 , conf3 , conf4 # dest1 , dest2 , dest3 , dest4
ITEM DESCRIPTION
*1
Key of message to configure the list of authorized users
#
Separation symbol
ID
Device ID. Max: 8 alphanumeric characters Default: DIGICOM
#
Separation symbol
conf1
Phone number enabled to configure and manage GSM/PSTN interface
,
Separation symbol
conf2
Phone number enabled to configure and manage GSM/PSTN interface
,
Separation symbol
conf3
Phone number enabled to configure and manage GSM/PSTN interface
,
Separation symbol
conf4
Phone number enabled to configure and manage GSM/PSTN interface
#
Separation symbol
dest1
Phone number enabled to receive the informative message from GSM/PSTN interface
,
Separation symbol
dest2
Phone number enabled to receive the informative message from GSM/PSTN interface
,
Separation symbol
dest3
Phone number enabled to receive the informative message from GSM/PSTN interface
,
Separation symbol
dest4
Phone number enabled to receive the informative message from GSM/PSTN interface
Note:
• You can configure a lower number of users.
• It is possible not to insert the list of users authorized to configurate the device; in
this case you must respect the sequence of # (hash) separation symbols.
• The phone numbers can be inserted with or without international prefix. You can
use numbers from 0 to 9 and the as first symbol in case you insert an
international prefix. Each phone number can be composed of 17 digits maximum
included the .
• If no list of authorized users is set (confix), then anyone can remote manage the
device.
Examples:
*1#D393351393409393351393409876543
*1#DIGICOM##+393351393409876543