9
ST-00000691-
344652
ON
1
OFF
2
2
1
01
0
2
2
A
A
B
17/03/2020
EN
Classe100 V16B handsfree video
internal unit
ENABLE/DISABLE THE KEY SOUND
With the basic configuration, when keys are pressed a BEEP is emitted. This function may be disabled/enabled as follows.
From stand-by, press and
hold down the joystick for about 8 seconds
to access the advanced menu and select the corresponding page
A Function status notification (ON = enabled, OFF = disabled)
1 Press the joystick to change mode
2 Move the joystick up/down to select another setting or the last
page to exit
ASSOCIATE A RINGTONE TO AN EVENT (CALL)
This page can be used to modify the ringtones associated to the different types of call.
The ringtones played for calls from EP configured with S=2 and S=3 are set by default and cannot be changed.
From stand-by, press and
hold down the joystick for about 8 seconds
to access the advanced menu and select the corresponding page
ICON
TYPE OF CALL
0
Selection of the call ringtone from the MAIN ENTRANCE PANEL (S =0)
1
Selection of the call ringtone from the SECONDARY ENTRANCE PANEL (S =1)
FLOOR CALL ringtone selection
INTERCOM CALL ringtone selection
EXTERNAL INTERCOM CALL ringtone selection (interface 346850 only)
Press the joystick to associate the first event
The page shows the type of call (A) and the current ringtone number (B)
2 Move the joystick up/down to select the type of call for which you
want to set the ringtone (see the following table)