BTEK 841-100040, Инструкция по эксплуатации и установке

Страница: 7 / 11

Page | 7
"Saved" appears). Exiting the "proto" option happens automatically after 30 seconds of user
inactivity.
“
custm
” option allows you to select the display communication protocol to work with the
weighing terminals of the selected clients. These protocols have special, custom settings
needed for the given client. Setting the protocol is done in the same way as in the case of the
"proto" option - saving the selected protocol is accomplished by long holding down the button
(until the message "Saved" appears), while exiting the "custm" option happens automatically
after 30 seconds of user inactivity.
Factory Default
“
reset
” option allows you to restore the default settings of the remote display and to activate the
autolearn mode. The default network layer settings will also be restored (IP address:
192.168.1.11, network mask: 255.255.255.0, configuration port for the WagSet RM software:
2101, communication port for the weighing terminal: 2102). To restore the default settings you
should press the B1 button and hold it down until the message "reset" appears during the
normal operation of the device. Hold the button down until the message "reset" starts flashing
and do not release it until the message "default" is displayed. Releasing the button before the
message "default" appears will result in interrupting the process of restoring the default settings
and the display will continue working according to the previously set parameters. Uploading new
network settings is possible using the WagSet RM software or via web panel.
Seq.
no.
Terminal name Protocol
Seq.
no.
Terminal name Protocol
0 Autolearn function 28 CAS NT570A
1 Rhewa 83 Plus 29 Cardinal 825
2 Radwag 30 Cardinal 204 225 748P
3 HBM WE2108 31 AMCS Group
4 HBM WE2110 32 A&D AD4329 AD4401
5 Rinstrum 320 420 Auto1 33 Ian Fellows SG0
6 SysTec / Pronova 34 Ian Fellows SG0 Status
7 SysTec 35 Zemic
8 Precia Molen Master D 36 Pfister DWT800
9 Precia Molen I300 Slave A+ 37 Pfister DWT410
10 Precia Molen I300 Master A+ 38 Axis Long
11 Dini Argeo Standard String 39 Avery L225
12 Mettler Toledo IND560 40 T – Scale U8
13 Fawag P2 41 Rice Lake 480 920i
14 Leon Engineering W-OUT 42 Vishay VT300
15 Soehnle 3010 3011 3015 13 43 Belt Way
16 Eurobil bilance Iscale Continua 44 Axtec
17 Compatible with the SMA protocol SMA 45 GSE 460 465
18 Sartosius Remote Control 46 GSE 250 AUTO1
19 Sensocar 47 STB-22
20 Flintec 48 Utilcell Matrix II Format1
21 Schenck Disomat B 49 Precia Molen i35 Master A+
22 Scheneck Opus Serial 50 Precia Molen i35 Master D
23 Gravex GX2SS 51 SMART SWIFT
24 Gravex GX18 52
Epelsa: BC, BI, Dexal, Cyber, Orion, Orion
Plus, Cyber Plus, V-36
Epelsa Cada
LetraB1
25 IHG TMI LP7510 53 B-tek String - Bold Font Serial String
26 Arpege MasterK 54 B-tek String – Normal Font Serial String
27 Bilanciai D410
Note:
“Proto” 53 is the B-TEK string bold font, “Proto” 54 is B-TEK string normal font,
“Custm” 28 is the Bilanciai Extended String.
Note 2: B-TEK strings allow alpha characters to be displayed in place of weight data.