This document is the
Property of Broadband Telecom Power Inc.
and
will not be copied, reproduced, or used as the basis for sale or
manufacture of apparatus without written permission.
BTCPower 200 KW EVSE Installation manual
Rev K
Page 11 of 26
Ripple current
< 15 A p-p, Maximum allowable peak
to peak HVDC output current ripple,
1kHz bandwidth limited
< 15 A p-p, Maximum allowable peak
to peak HVDC output current ripple,
1kHz bandwidth limited
AC to DC Power Converter Specifications (Low Output (50KW) Configuration)
BTC PN: EVPC-150-3-480-3 (Three Output)
Parameter
Specification
Input Voltage Range
480 VAC, three phases, +10%, -10%
Input Current @ 480 VAC 180 Amps
Frequency 47
–
63 Hz for three phase inputs
Power Quality
IEEE-519 and IEC 6200-3-4
DC Output
Maximum Power
50 KW per output 4 simultaneous up to 200 KW
Max Output Current
125 Amps per output
Minimum Current (In
current mode)
5 Amps
Enclosure IK rating
IK 08
Enclosure IP rating
IP 54
Total Harmonic
Distortion
THD < 5%
DC Output voltage range
50-500 VDC
Efficiency > 94% (at full load) power stage only
Power Factor 0.99 full load
Outdoor enclosure
NEMA 4, IP 54 equivalent
Dimensions (Refer to
DWG 200KW-AFE-T-
00.PDF)
80” High, 41” Width, 33” Deep
Estimated weight, 1,800 lbs.
Modularity
Not applicable
Ripple current
< 15 A p-p, Maximum allowable peak to peak
HVDC output current ripple, 1kHz bandwidth
limited
AC to DC Power Converter Fault Protection and Safety Features
Converter compliance matrix
Feature
Specification
Specification
HI pot withstand
UL 2231-1/2, UL 840
UL 2231-1/2, UL 840
Insulation resistance
UL 2231-1/2, UL 840
UL 2231-1/2, UL 840
Output voltage regulation
+/- 2%, no load
+/- 2%, no load
Over temperature
Self-protected and latched
Self-protected and latched
