This document is the
Property of Broadband Telecom Power Inc.
and
will not be copied, reproduced, or used as the basis for sale or
manufacture of apparatus without written permission.
BTCPower 200 KW EVSE Installation manual
Rev K
Page 10 of 26
120 VAC (single phase), 30 Amps for operation
in areas where extreme cold weather is to be
expected. (Operation at under -10C)
(NON-COOLED CABLE)
120 VAC (Single phase), 20 Amps. Both
C CCS and CCS + CCS models. (If
not upgradeable to cooled cable)
Connectors available, CCS only
Rema (600 VDC), 125 Amps Continuous
Connectors available, CHAdeMO
only
SEI Sumitomo Electric (600 VDC), 125 Amp
Continuous
1.
DCFC “Power Box” specifications:
AC to DC Power Converter Specifications (High Output (200KW) Configuration)
BTC PN: EVPC-200-2-480-3 (Dual
Output)
BTC PN: EVPC-200-1-480-3 (Single
Output)
Parameter
Specification
Specification
Input Voltage Range
480 VAC, three phases, +10%, -10%
480 VAC, three phases, +10%, -10%
Input Current @ 480 VAC 240 Amps
240 Amps
Frequency 47
–
63 Hz for three phase inputs
47
–
63 Hz for three phase inputs
Power Quality
IEEE-519 and IEC 6200-3-4
IEEE-519 and IEC 6200-3-4
DC Output
Maximum Power
200 KW
200 KW
Max Output Current (non
continuous)
500 Amps CCS, 250 Amps CHAdeMO 500 Amps CCS
Minimum Current (In
current mode)
5 Amps
5 Amps
Enclosure IK rating
08
08
Enclosure IP rating
IP 54
IP 54
Total Harmonic
Distortion
THD < 5%
THD < 5%
DC Output voltage range
50-920 VDC
50-920 VDC
Efficiency > 94% (at full load) power stage only > 94% (at full load) power stage only
Power Factor > 0.99 full load
> 0.99 full load
Outdoor enclosure
NEMA 4, IP 54 equivalent
NEMA 4, IP 54 equivalent
Dimensions (Refer to
DWG 200KW-AFE-T-
00.PDF)
80” High, 4
1
” Width, 33” Deep
Estimated weight, 1,800 lbs.
80” High, 4
1
” Width, 33” Deep
Estimated weight, 1,800 lbs.
Modularity
Power can be switched from one
output to the other in increments of
50 KW
