Dual Digital Drive
5
5. If you have a sound card that can be connected to the drive, you
can also connect the drive (as Audio-Out) and the sound card (as
Audio-in) with a 4-pin audio cable.
If your mainboad is integrated with built-in sound system, plug the
4-pin audio cable into the CD-IN connector on the mainboard as
Audio-in.
6. Connect the USB cable at the back of the drive to the USB
header on the computer’s mainboard. The red wire of the cable
needs to be plugged into Pin 1 on the board. If the connection is
correct, the lower LED on the front panel will light
Yellow
.
This drive supports USB 1.1 and if you connect to USB 2.0
connector, only transfer rate of USB 1.1 will be available.
Signal
Red/Vcc
Pin #
1
Mainboard
USB
RED WIRE
IDE
RED WIRE
USB Header
White/D-
Green/D+
Black/Ground
Braided Shield Ground
2
3
4
5
7. Re-attach the cover of the computer, and reconnect the power
cord and all cables to the computer.
