7
Remarks:
1.
You must follow the procedure above to set ID of receiver, and then keyboard.
After
the receiver ID button is pressed, you have
1 minute
to complete the entire process, from
the moment when ID button on receiver is pressed (step 1), until ID button on keyboard is
pressed (step 2) also, or you will need to begin again.
2. If the keyboard does not work after ID setting procedure, or the signal transmission
between the receiver and keyboard is interrupted, please re-proceed ID setting procedure.
3. Receiver LED status:
-
When receiver USB connector is plugged in, the LED will flash for several times.
-
The LED will remain steadily on when the ID setting procedure is complete.
4. When changing the batteries of keyboard, please remember to reset ID.
