BTBP CLARITY Mini 3D, Руководство пользователя

Страница: 8 / 201

8
BrighTex Bio-Photonics, LLC
Confidential

If it is heavily smeared, wipe it with a wrung out cloth moistened with dilute neutral detergent, then dry it with a
soft cloth. NEVER clean any of the system equipment with water. Using flammable substances near the unit’s high-
voltage areas may also result in a fire or electrical shock.

Always ensure that the main station and other accessory equipment are placed on a dry, stable surface. Placing
them on a swaying base or inclined place may cause the product to fall down resulting in breakdown and/or injury.

Keep cables free and clear from traffic areas to prevent trip hazards.

When transporting the system, be sure to place it into the original packing box. If you use any box other than that,
this may cause the product to fail or break down due to being given vibration or shock.

Be sure to disconnect the cables before moving the Clarity System.

Keep the BTBP Clarity
TM
Mini 3D System clear of any food or liquid.

If the system shows an abnormality like emission of smoke, excessive heat or unpleasant smell, stop operating it. If
you continue using it, it may cause a fire or an electrical shock. If you find any abnormality, unplug the connector
from the PC immediately, and contact your local dealer or the BTBP Technical Support. Never service the product
by yourself as this is extremely dangerous.

Should any liquid such as water come into the inside of the system, unplug the device connector from the PC
immediately and contact your local dealer or the BTBP Technical support. If you continue to use it, it may lead to a
fire or an electric shock.

Connect the power cord of the equipment only to properly grounded electrical receptacles to prevent the
occurrence of fire or electrical shock.

Follow the instructions and specifications provided in this user guide, for proper installation of the BTBP Clarity
TM
Mini 3D System hardware and software.