To put a pause in the one-touch memory
For such services as home banking, you may
need to use the
PAUSE
function. Storing a
pause is simple. Begin entering a number as
shown previously; where you need to insert a
pause, press the
PAUSE
button. The display
will show
-
. Continue to store the rest of the
number as normal.
Using the telephone
20
•
Press the
button to confirm your entry,
the display shows
SELECT BUTTON
.
•
Press the
STOP
button three times to return
to standby mode.
To edit one-touch names and numbers
•
Press the
SET UP
button.
•
Press the
§
or
©
buttons until the display
shows
ONE TOUCH SET-UP
.
•
Press the
button; display shows
SELECT BUTTON
.
•
Press the one touch button under which the
entry you want to edit is stored, display
shows
EDIT ENTRY
followed by the name.
You can now edit the name.
•
When you have edited the name press
the
button; display shows
EDIT FAX NO
followed by the fax number. You can now
edit the fax number.
•
When you have edited the fax number press
the
button; display shows
EDIT TEL NO
.
followed by the telephone number. You can
now edit the telephone number.
•
When you have edited the number press
the
button; display shows
SELECT
BUTTON
.
•
You can now edit further entries or return
to standby mode by pressing the
STOP
button three times.
SET UP
P
One-touch memory label
Keep a reminder of the
names stored in the
ONE-TOUCH
memory
on the label. Slide out
the plastic cover and
the memory label and
write in the names
alongside the relevant
buttons, then replace
the label and the cover.
Writing the name in pencil allows you to neatly
change it if necessary.
Call Return
Call Divert
2
4
7
8
9
10
6
1
3
5
Once a one-touch number has been stored, make
a note of the entry by writing the number on the
directory label. Using a pencil makes it easy to
write in any changes to your one-touch directory.
