BT Graphite 3500, Руководство пользователя

Страница: 32 / 48

32
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Using the answering machine from
the handset
Set answer mode and switch on / off
You can set your answering machine on or off from the handset.
When switching on, select Answer & record or Answer only mode.
See below for further information on answer mode and
outgoing messages.
1
. Press
Menu
, scroll
Calls
Redial
to Ans MACHInE. Press
Menu
.
2
. Scroll
Calls
Redial
to AnsWER MODE and press
Menu
.
3
. Scroll
Calls
Redial
or
Calls
Redial
to display:
Ans & RECORD – press
Menu
to switch on and allow callers to
leave a message.
AnsWER OnLy – press
Menu
to switch on and enable callers to
hear an outgoing message only.
AnsWER OFF
– press
Menu
to switch answering machine off.
4 . Press
Secrecy
to return to the previous menu level.
Outgoing messages
The outgoing message is the message a caller first hears when the
answering machine picks up their call. There are 2 pre-recorded
outgoing messages to choose from (see note right), or you can
record your own.
Record your own outgoing message
1
. Press
Menu
. Scroll
Calls
Redial
to Ans MACHInE . Press
Menu
.
2
. Scroll
Calls
Redial
to OUTGOInG MsG and press
Menu
.
3
. Ans & RECORD is displayed. Press
Menu
or scroll
Calls
Redial
to AnsWER
OnLy and press
Menu
.
4
. Scroll
Calls
Redial
to RECORD OGM and press
Menu
.
5
. Speak your announcement after the voice prompt and beep.
Hold the handset in front of your mouth by approximately
30-40cm when recording your message or memo.
Press
Menu
to stop recording. Your new message will be played back.
Outgoing messages:
Answer and Record
The pre-set Answer and Record
outgoing message, that allows
your caller to leave a message, is
“Hello, your call cannot be taken at
the moment, so please leave your
message after the tone”.
Your Answer and Record outgoing
message will replace the pre-
recorded message.
To reinstate the pre-recorded
messages, delete your own recorded
outgoing message, see below.
Answer Only
The pre-set Answer Only outgoing
message, where callers hear an
announcement but cannot leave a
message, is “Hello, your call cannot
be taken at the moment and you
cannot leave a message, so please
call later”.
When recording your Answer Only
message, remember to advise your
caller that they will not be able to
leave a message.
Your own Answer Only message will
replace the pre-recorded message.
9881 Graphite 3500 UG [1].indd 32 13/9/10 16:30:28