Operation
6
CLS Pro 600 – Line and Contrast Sensor
69/108
Parameter
Function / Meaning
internal:
Use this parameter to configure the bright
field illumination. The settings are set up
automatically in the standard application.
If a reasonable value cannot be set up in
automatic mode, e.g. due to the expected
different illumination situations (undulating,
smooth material), then automatic will be
switched off and the required value can be
set up using the
brightness
parameter.
▶
brightness
:
Setting Range:
0 – 100 %
0% means that the bright field illumination is
switched off. 100% means maximum bright-
ness.
▶
automatic
:
Setting Options:
ON, OFF
Pre-Adjustment:
ON
The
optional
and
external
parameters are not used at the mo-
ment.
6.7.2.3 \\parameter\destination\
destination:
Use this parameter to set up over- or underexposure for the relev-
ant area in automatic mode. These settings can also be used for
weak colors inside a light background.
Setting Range:
0 – 300 %
Pre-Adjustment:
100 % (i.e. no overexposure)
6.7.2.4 \\parameter\contrast detection\
illumination:
The parameters that apply to the contrast detection are set up in
this sub-menu.
Parameter
Function / Meaning
quality:
Use this parameter to set up the lower con-
trast search threshold.
NOTICE! This setting is only available
when the "auto adjustment" para-
meter is switched off.
Determining the search threshold can be
helpful when, for example, a contrast that
varies considerably is present.