Operation
6
CLS Pro 600 – Line and Contrast Sensor
61/108
If an error occured during the loading process, the following sym-
bol is displayed in the display header:
The loading error may have the following reasons:
■
File does not exist (access via external interface).
■
File is corrupted (e.g. system has been shut down during saving
procedure; here the setup has to be repeated and saved again
to the respective slot).
■
Externally loaded setup is corrupted (setups can be loaded via
interface (c2e) independently of the internal slots).
6.6.5.3 Deleting a Setup
If you want to delete one of the saved setup, please do the follow-
ing:
1. Select the
\\setup slots\delete setup
menu. A selection list of
all saved setups will be displayed.
2. Select the setup to be deleted using the arrow keys.
3. Press ENTER to confirm your selection. The warning message
delete slot ?
is displayed know. If you actually want to delete
this slot, press
ENTER
again. If you do not want to delete the
slot, press
ESC
to cancel this procedure.
6.7
Main Menu Parameter Meanings
6.7.1
Configuration
The sensor, panel and mounting position settings are entered via
the
Configuration
sub-menu.
Caution!
You can call up this sub-menu with password level Admin
and in setup mode.
6.7.1.1 \\configuration\commander\
commander:
The parameters that apply to the panel are configured in this sub-
menu.
Parameter
Function / Meaning
display dimtime:
This parameter can be used to dim the
panel’s LCD display. The screen’s background
illumination brilliance will be dimmed after a
set period has expired. The screen will be
brightened once again when a key is pressed
and the action will also be executed.
Setting Range:
0 – 15 min
Default Setting:
5 min