background image

41

This unit is warranted by BSS Audio to the original end user purchaser against
defects in workmanship and the materials used in its manufacture for a period
of one year from the date of shipment to the end user.

Faults arising from misuse, unauthorised modifications or accidents are not
covered under this warranty. No other warranty is expressed or implied.

If the unit is faulty it should be sent, in its original packaging, to the supplier
or your local authorised BSS Audio dealer with shipping prepaid.

You should include a statement listing the faults found. The unit’s serial
number must be quoted in all correspondence relating to a claim.

We recommend that you record your purchase information here for future
reference.

Dealer Name:

Dealer Address:

Post/Zip Code:

Dealer Phone No.:

Dealer Contact Name:

Invoice/Receipt No.:

Date of Purchase:

Unit Serial Number:

In keeping with our policy of continued improvement, BSS Audio reserves the
right to alter specifications without prior notice.

The 

TCS-80X

 was designed and developed by BSS Audio, Hertfordshire,

England.

Phone (+44) (0)1707 660667. Fax (+44) (0)1707 660755.

World Wide Web address: http://www.bss.co.uk

Warranty Information

IMPORTANT

22.0

Warranty Information

Содержание TCS 80X















































Отзывы: