BSS Audio TCS 80X, Руководство пользователя

Страница: 25 / 46

25
The control knob increments in one degree steps and the range of temperature
adjustment available extends from -19
°
C to +44
°
C. If there are a number of
TCS-80X units within an installation, then rather than have a temperature
probe fitted to each, it is possible to transfer the temperature data from one
master probe to all other units by utilising the MIDI interface.
Please refer to
section 12
for an explanation of how to implement this feature.
Please note that when a probe is first plugged in, it can take up to one minute
before the temperature appears on the display.
Allow at least ten minutes for
the probe temperature to stabilise before setting delay times and if the probe
is unplugged at any time, the last measured temperature remains active.
The probe should be placed in a position away from equipment heat, out of
direct sunlight and where a typical temperature for the venue is likely to be
found. A standard screened XLR lead may be used to connect the temperature
probe to the jack adapter which plugs into the
TCS-804 .
When setting up for master/slave operation it is possible to select a number of
different modes and these are selected from the utility menu.
Master/Slave Transmit
mode
Turn the knob to select the required mode from:
tr. -; tr.t
°
; tr.SL; tr.Pr
Press and hold to exit to normal display.