BSS Audio DCP-555 Скачать руководство пользователя

Страница: 57 / 83

VoIP General Settings

RPort

This field sets the default port that RTP is using. The port number ranges from 0

(default) to 65535. Setting a value other than "0" for the RPort changes the SIP routing

behavior so that responses can be received through a NAT, even if private addresses

are used in the SIP headers. The Rport should only be changed if the transport is

unreliable.

T1, T2, T4, and TD Timers (ms)

Timer

Default

Description

T1Timer 500 ms

For unreliable transports, such as UDP, the

client transaction retransmits requests at an

interval that starts at T1 seconds and doubles

after every retransmission. T1 specifies an

estimate of the round-trip time (RTT). Nearly all

of the SIP transaction timers scale with T1, and

changing T1 adjusts their values.

T2Timer 4000

Specifies the maximum retransmit interval for

non-INVITE requests and INVITE responses.

For unreliable transports, requests are

retransmitted at an interval which starts at T1

and doubles until it reaches T2. If a provisional

response is received, retransmissions continue

for unreliable transports, but at an interval of

T2. T2 represents the amount of time a non-

INVITE server transaction takes to respond to a

request if it does not respond immediately.

T4Timer

5000

Specifies the amount of time the network takes

to clear messages between client and server

transactions.

TDTimer 32000

Specifies the maximum duration a message will

remain in the network.

Note:

Do not change these timer settings unless you are well aware of their

consequences. Contact the network administrator before changing these settings.

MAC Address

Содержание DCP-555




















































































Результаты поиска

Содержание DCP-555

Отзывы:

Похожие инструкции для DCP-555

Бренды по названию

Популярные бренды

BSS Audio DCP-555, Файл справки

Результаты поиска

Содержание DCP-555

Отзывы:

Похожие инструкции для DCP-555

Бренды по названию

Популярные бренды