BSS Audio DCP-555 Скачать руководство пользователя

Страница: 31 / 83

AEC

speech only.

ERLE Meter

The Echo Return Loss Enhancement (ERLE) meter displays how much acoustic echo is

being removed from the signal. This measurement includes both the natural room

attenuation as indicated by the ERL meter and the amount of echo removed by the AEC

algorithm. A lower level indicates more echo being removed. The lower the meter, the

better.

Note:

As dictated by industry standards, NLP (Non-Linear Processing) contributions

are not included in the ERLE reading. NLP contributions are made in addition to this

meter's reading.

NLP Strength

The Non-Linear Processing (NLP) Strength setting determines the amount of non-linear

suppression that will be applied in conjunction with the AEC algorithm. NLP will remove

the residual echo not removed by the linear part of the AEC algorithm.
This parameter represents a trade-off between achieving good double-talk performance,

with no suppression of the local speech signal, and very robust echo suppression, with

no echo audible on the far side.
At its most aggressive setting (NLP at 80%), the non-linear processing will remove any

of the residual far-side echo picked up by the microphone. However, this is done with an

increased risk that some of the near-side speech will be degraded as well, especially

during double-talk. At its least aggressive setting (NLP at 0%), the non-linear processing

is effectively disabled, which may let some echo through, but will allow for a more

natural double-talk performance.
The best setting for this parameter may depend on several factors, including the

acoustic properties of the room and user preference. The default value of 42% may give

a good balance between these two competing goals.

Auto Gain Control On/Off Switch

This switch turns AGC on or off.

Note:

Do not use AGC in conjunction with an AutoMixer. Doing so will cause

unpredictable and uncontrollable level fluctuations.

Содержание DCP-555




















































































Результаты поиска

Содержание DCP-555

Отзывы:

Похожие инструкции для DCP-555

Бренды по названию

Популярные бренды

BSS Audio DCP-555, Файл справки

Результаты поиска

Содержание DCP-555

Отзывы:

Похожие инструкции для DCP-555

Бренды по названию

Популярные бренды