Use of machine
142
Verti-Mix 951-1651, Verti-Mix 951 L-1251 L, Verti-Mix 1501 D-2401 D 10.13
10.3.6 Eliminate blockages
WARNING
Risk of crushing, shearing, cuts, amputation, becoming
entangled, wound up, being drawn in and risk of impact to
people if:
lifted, unsecured machine parts accidentally come down or
are unintentionally lowered , e.g. an open discharge door,
the machine is unintentionally started or rolls accidentally.
Secure lifted machine parts against accidental lowering before
working beneath lifted parts.
Secure the machine against accidental starting and rolling
before eliminating any blockages on the machine.
Wait for the machine to stop completely before entering the
hazardous area of the machine.
WARNING
Risk of cuts if people reach into sharp-edged cutting knives of
the mixing auger(s) when eliminating blockages!
When eliminating blockages, beware that sharp-edged cutting knives
of the mixing auger(s) may be within the discharge opening area.
CAUTION
Risk of damage to the machine if you change the sense of
rotation of the tractor’s p.t.o. shaft for eliminating blockages!
Never change the sense of rotation of the tractor’s p.t.o. shaft.
1. Switch the p.t.o. shaft off.
2. Completely open the discharge door of the clogged discharge opening if necessary.
3. Secure tractor and machine against accidental starting and rolling, observe the information in the
chapter "Secure tractor and machine against accidental starting and rolling", page 146.
4. Eliminate the blockage such that the discharge opening gets free and the mixed materials can be
easily discharged again.
5. Start the tractor engine.
6. Close the discharge door.
7. Switch the p.t.o. shaft on.
8. Power the mixing auger at the desired driving speed.
9. Open the discharge door at the desired opening width and continue the fodder discharge.
