33
LCD-V8 Portable Workstation
Fig.[13] Adjusting hold-down clamp.
Fig.[13] Adjusting hold-down clamp.
Fig.[13] Adjusting hold-down clamp.
Fig.[13] Adjusting hold-down clamp.
Fig.[13] Adjusting hold-down clamp.
Installing Internal Drives
Your workstation has space for a 5.25” and two 3.5” half-height drives. You
may also have an optional fourth 3.5” hidden drive bay near the power
supply. To install or remove a drive, follow these steps:
1.
Shut down the system and unplug the power cord from the power
supply. Set your workstation in its upright position with the back
cover facing you.
2.
The drive housing is attached to the chassis by four screws located
on the bottom of the chassis and two screws on the left side panel
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com