CRYSTAL CLEAN AIR
TM
7
BSE, Inc., 2246 Palmer Drive, Suite 108, Schaumburg, IL 60173
T: 866-360-5675 email:
@bsesales.com web: www.bsesales.com
Figure 7: Dimensions
Ionization Placement &
Clearance
Crystal Clean Air Ionization units should not be located near to air exhausting inlets of other HVAC
equipment. Supply air outlets can be configured to aid the ionized air disbursement in a uniform
manner. Ionizer should be oriented such that the outlet is slightly below any ceiling fans. Exhaust
fan inlets or other return air points creating a negative pressure should not be within 10.5 times the
diameter of the ionization unit. Proper systems orientation will provide an enhancement to the
Indoor Air Quality (IAQ) and occupant comfort.
Required Clearances for Max
Figure 8: Installing Max Wall-Mounted.
Required Clearances for Max
Figure 9: Installing Max Ceiling-Mounted
Required Clearances for Max Wall
Mounted Unit
See the figure on the right for required clearance
distances around an installed wall-mounted unit.
•
There must be a minimum clearance of 6 inches from
the top of the MAX unit to the ceiling.
•
Clearance gap between any wall or enclosure and the
left or right side of the unit must be greater than 4
feet.
•
The base of the unit is recommended to be at least
7.0 feet
from the floor for adequate disbursement.
•
The recommended height top is not to exceed
11
feet
from the floor.
Required Clearances for Max Ceiling
Mounted Unit
See the figure on the right for required clearance and
distances around Max ceiling-mounted unit.
•
There must be placed slightly below any ceiling fans.
•
The base of the unit must be at least
7.0 feet
from
the floor for adequate disbursement.
6”
4'
