ENGLISH
Amis S430/S630 User’s Manual 47
Installing the Heart Rate Monitor
C
LO
SE
O
PEN
2
C
L
OS
E
O
PEN
1
4
3
5
Sensors
Heart Rate
NOTE:
Adjust the sensor position to the middle part of the body. The belt should be worn
•
under the chest and directly on your body. The Bryton logo shown on the sensor should
be facing upward. Tighten the elastic belt firmly so that it will not turn loose during the
exercise.
In cold weather, wear appropriate clothing to keep the heart rate belt warm.
•
If the sensor cannot be detected or the reading is abnormal, please wet the electrodes area
•
with water as shown in the step 3 or warm up the heart rate sensor for about 5 minutes.
If the heart rate belt is not used for a period of time, remove the sensor from the heart rate
•
belt to prevent the battery from running flat.
Heart rate sensor does not work under water. This is common to all ANT+ sensors.
•
For triathlon, it is recommended to wear Heart rate belt after swimming as water will
•
reduce the strength of heart beat signal. If the heart rate belt is wore before swimming,
heart rate data may not be properly recorded after leaving the water for a period of time.
The Amis devices and heart rate monitor (HRM) are waterproof. However, the
•
wireless signal does not transmit through water and as a result, this disrupts the data
communication between the device and the HRM.
