4
STANDARD FEATURES AND ACCESSORIES
Ease Of Installation
Mounting Brackets
S
Low Voltage Controls
S
Comfort Features
Microprocessor Controls
S
Wired Remote Control
A
Wireless Remote Control
S
Automatic Horizontal Air Sweep
S
Air Direction Control
S
Auto Restart Function
S
Cold Blow Protection On Heat Pumps
S
Freeze Protection Mode On Heat Pumps
S
Turbo Mode
S
Silence Mode
S
Auto Changeover On Heat Pumps
S
Follow Me
S
Energy Saving Features
Sleep Mode
S
Stop/Start Timer
S
46° F Heating Mode (Heating Setback)
S
Safety And Reliability
3 Minute Time Delay For Compressor
S
Over Current Protection For Compressor
S
Indoor Coil Freeze Protection
S
Indoor Coil High Temp Protection in Heating Mode
S
Condenser High Temp Protection in Cooling Mode
S
Ease Of Service And Maintenance
Cleanable Filters
S
Diagnostics
S
Liquid Line Pressure Taps
S
Application Flexibility
Condensate Pumps
A
Crankcase Heater
S
Legend
S Standard
A Accessory
INDOOR UNITS
Fig. 1 – Condensate Pump Accessory
On high wall fan coils, the condensate pump has a lift capability
of 12 ft (3.6 m) on the discharge side with the pump mounted in
the fan coil or 6 ft (1.8 m) on the suction side if the pump is
remote mounted. The pump is recommended when adequate drain
line pitch cannot be provided, or when the condensate must move
up to exit.
NOTE
: An external 115v power source will be required to run the
pump on unit sizes 9k and 12k.
OUTDOOR UNITS
Crankcase Heater
Standard on all unit sizes. Heater clamps around compressor oil
stump.
