GENERAL MAINTENANCE
1.
Oil should not be used on the 13000 Brutus Tile Cutter. Use of oil will cause
eventual gumming and sticking of the movable parts as the oil combines with
dirt and ceramic tile dust.
2.
Wear is normal in the chrome plated rails and can be evenly distributed by
occasional rotation of each of the two rails. For cutters with hex bolts holding
the rails, loosen each hex bolt and slightly rotate the rails. Retighten the hex
bolts when finished.
3.
The only part routinely needing replacement is the carbide scoring wheel. All
other parts are also available, if needed.
- 3 -
EXTRA CUTTING WHEEL STORAGE
The 13 in. Brutus Tile Cutter features a
convenient storage compartment in the
handle, for spare 7/8 in. cutting wheels (Fig 5).
Simply unscrew the handle end to open.
PARTS LIST
CUTTING
WHEEL STORAGE
FIG. 5
1 bolt
2 spring
washer
3 flat
washer
4
sponge cushion 1
5
sponge cushion 2
6 sliding
bar
7 washer
8 guide
knob
9 ruler
10
base
11 support
12 nut
13 spring
washer
14
slide
15 bolt
16 connecter
17 cutting
wheel
18 bolt
19 bolt
20 push
bar
21 breaker
foot
22 handle
base
23 handle
cover
24
flange nut
13000_manual 9/4/08 2:03 PM Page 3
