BRUSTOR B300XL, Инструкция по монтажу, Страница: 7 / 26

OL-B300-05
› Hook the cross members on to the vertical poles. (1)
› Completely tighten both screws.
› Screw the two lower screws in the profile. (2)
Make sure the mainhousing is well positioned compared to the hole in the pole.
› In case of wallfixation, secure the cross member by mounting a bolt
on both sides of the screen. (3)
ROOF IN 2 PARTS
› On both ends of the screen, screw four bolts in the profile (M8x25). Do not fasten them completely,
leave 10 to 15mm free space.
› Make sure a gasket is placed at the end of the profile.
› Hook the middleguide between the 2 screenboxes (1)
› Secure both sides of the middleguide with 4 bolts (M8x25) through the mainhousing.
10 a 15
› Remove the rollertubes from the screens.
› On both ends of the screen, screw the two upper screws in the profile (6.3x50) (1 screw if coupled).
› Do not fasten them completely, leave 10 to 15mm free space.
SW10
4x
1
2
3
long bolt
SINGLE
walladapter
!
DIN 912 M8x25
Gasket
3/8” to 1/4”
3/8” to 5/8”