Brunswick Innova 4000, Руководство пользователя

Страница: 40 / 64

28
5.8 Recorder Adaptation
To record speed and temperature, you can use a recorder (not supplied) that has the
following capabilities:
•
Two channels, one for speed and one for temperature. Each channel should have
signal conditioning which accepts 0-5 volt input.
•
A mating connector is required on the recorder cable (not supplied). This is a 9-
pin male D subminiature connector: AMP Amplimite HDP-20 series or
equivalent.
The pinout diagram (as seen from the back of the unit) and scale below identify the
application.
Figure 9 Recorder Connector
Pin Number Signal Name Scale
6 Speed
2 Ground 1V = 100 RPM
7 Temperature
3 Ground 1V = 20°C
WARNING REMINDER!
None of the following procedures should be attempted by
anyone who is not a service technician authorized by NBS.
Innova 4000/4080
•
M1192-0050 User’s Guide