Brunswick Innova 4000, Руководство пользователя

Страница: 30 / 64

18
The setpoint may be changed during a run without stopping the shaker by following Steps 2-
4. During speed changes, the alarm will flash until the speed returns to within 5 RPM of the
etpoint. s
4.3 Checking Setpoints
1. Press SELECT until the desired indicator is lit.
2. Press
either
∆
or
∇
to enter the SET mode and to display the current setpoint.
CAUTION!
Holding the
∆
or
∇
key for more than 0.5 second causes
the speed, time or temperature setpoint to change.
Should this occur, reset the setpoint.
4.4 Timed Functions
The shaker may be programmed to stop automatically after a preset time period of 0.1
hour - 99.9 hours. Power must be supplied to the shaker in order to set the timer. A
timed run, however, can be initiated while the unit is either shaking or stopped.
To set the timer:
1. Press the SELECT key to light HRS.
2. Set the time by pressing the
∆
or
∇
key until the desired setpoint is displayed (0.1 -
99.9 hours).
3. To start the timer operation, press the
∆
or
∇
key once. The SET indicator should
light.
4. While the SET indicator is on, press the START/STOP key. The time indicator
will light and remain lit for the duration of the run. At the end of the timed run the
display will read “OFF”, the time indicator will flash, and the audible alarm will
sound (if it is enabled).
5. The setpoint may be changed during a run without stopping the shaker by
following steps 1 and 2.
To stop the alarm: Press the SELECT key and change to any other function.
To cancel the timer without stopping the shaker:
1. Repeat steps 1 and 2.
Innova 4000/4080
•
M1192-0050 User’s Guide