Brunswick Innova 4000, Руководство пользователя

Страница: 24 / 64

12
3.3 Space Requirements
It is essential that the shaker be situated in an area where there is sufficient space for
the unit and its service lines (
see Figure 5 ).
The dimensions of the Innova 4000 are:
Width
21 inches 53.4 cm
Depth 27½ inches 69.9 cm
Height 19¾ inches 50 cm
The effective surface area required for operation is:
Width
23 inches 58.4 cm
Depth 30 inches 76.2 cm
3.4 Hose Connections
#
NOTE:
If a cooling coil has been factory-installed, follow the procedure below
to make the appropriate connections, referring to Figure 2.
Eight feet of reinforced rubber hose and clamps are provided for connection to the
coolant or water supply.
1. Cut the hose into two pieces to suit a water supply and drain length requirement.
2. Attach the two hoses to the cooling coil connection tubes with two clamps,
allowing 1/8 to 3/16 inch of hose to extend beyond the clamps.
3. One line must go to an open drain or return to a coolant supply, and the other line
must be connected to a water or coolant supply.
#
NOTE:
If the unit is using tap water as the coolant, it is preferable that the
supply hose be attached to a supply valve, to minimize water use.
Innova 4000/4080
•
M1192-0050 User’s Guide