Brunswick 750 IMPACT, Руководство по эксплуатации и техническому обслуживанию

Страница: 134 / 156

6-20
Section 6 Boat Maintenance
Hull Drainage
Remove the main hull drain plug. Open all internal
seacocks and drains. Verify that there is no debris
plugging any drain, seacock, or limber hole.
Store the boat with the bow higher than the stern to
promote adequate drainage.
Secure the main hull drain plug to the steering wheel
to alert personnel that the boat is in storage configura-
tion.
Make sure that both scupper extension tubes are in
the down and free position.
Refer to High-capacity Scuppers in Section 4 for
additional information about the extension tubes.
Engine Bracket
Remove the engine bracket drain plug. Verify that
there is no debris plugging the drain hole.
Store the boat with the bow higher than the stern to
promote adequate drainage.
Secure the engine bracket drain plug to the steering
wheel to alert personnel that the boat is in storage
configuration.
!
WARNING
Never leave the boat unattended when the
scupper extensions tubes are in the raised and
locked position, whether the boat is in the water
or on its trailer. Raised and locked extension
tubes can allow water to accumulate in the
boat, damaging equipment or swamping the
boat.