Brunswick 750 IMPACT, Руководство по эксплуатации и техническому обслуживанию

Страница: 105 / 156

5-11
Electrical Systems Section 5
DC Power Distribution
All DC electrical devices and systems in your boat are
controlled and protected by seven main 12 VDC
power distribution circuits.
Starboard Engine
Main 12 VDC power circuit 1 of 7 provides power for
starting the starboard engine through a battery OFF-
ON switch connected to a Group 24 1000 MCA bat-
tery. The starboard engine battery OFF-ON switch is
located in the control console, just inside the console
door.
The main power and negative cables from the star-
board engine route through the splash-well boot and
connect to this power circuit through a main two-posi-
tion, heavy-duty terminal strip located near the tran-
som. The main terminal strip simplifies engine
removal for service or replacement.
Turning the starboard engine battery OFF-ON switch
to the OFF position at the end of your mission will cut
power to the starboard engine and its accessories.
Port Engine
Main 12 VDC power circuit 2 of 7 provides power for
starting the port engine through a battery OFF-ON
switch connected to a Group 24 1000 MCA battery.
The port engine battery OFF-ON switch is located in
the control console, just inside the console door.
The main power and negative cables from the port
engine route through the splash-well boot and connect
to this power circuit through a main two-position,
heavy-duty terminal strip located near the transom.
The main terminal strip simplifies engine removal for
service or replacement.
Turning the port engine battery OFF-ON switch to the
OFF position at the end of your mission will cut power
to the port engine and its accessories.
See Wire Color Chart in this section for wire colors.