Operating and service instructions
|
LMS 120
5
The current status and the measurements can be read from the display. The 5 LEDs to the left of the display
provide a quick overview of the current device status.
Fig. 2 (View of device)
3.
Installation
3.1. Mechanical installation
The mechanical installation of the LMS 120 monitoring device
can be carried out on an even dry wall (drilling template) or
alternatively in a control cabinet.
At the place of installation, the device must be protected
against humidity (formation of condensation), strong dust and
strong electromagnetic fields. The safety notes, protection
measures and notes stated in these operating instructions
must be observed (see Safety notes; page 3). The housing lid
must be removed for fastening.
The installation must be carried out with fasteners that are
suitable for the respective substrate.
Fig. 3 (Wall installation)
Display
LEDs
Alarm contact
Voltage 2 (12v)
Alarm menu key
Cursor keys
Alarm off key
Terminal - channel 2
Terminal - channel 1
