© Brüel & Kjær Vibro
● C107758.002 / V04
Page 37 of 42
Technical alterations reserved!
Brüel & Kjær Vibro
│
Installation instruction VCM-3 / VCM-3 Ex
Internal storage and external storage
devices
EN
UNRESTRICTED DOCUMENT
9.2
External storage
– USB memory stick
USB information
The VCM-3 bus interface supports USB storage devices
which comply to the USB 2.0 standard.
USB 3.0 only storage devices or devices with a current
consumption >500 mA are currently not supported.
USB storage devices must be pre-labeled
"EXT_STORAGE
" or “HISTORY“ to be accepted by the
VCM-3.
It is possible to use a combination of SD and USB
A label can only be used once!
