Brudden Movement HOME LINE R1, Руководство пользователя

Страница: 91 / 147

MAINTENANCE
42
CONSOLE
ITEM
CAUSE MAINTENANCE
E6
Explosion-proof:
abnormal supply voltage or abnormal engine
will cause damage to the drive motor circuit.
The treadmill stops working and starts
failure mode when an alert sound plays
9 times. The console displays the fault
code. After maintaining the fault mode
for about10 seconds, the equipment
enters on stendby, restart the equipment.
Reasons: check if the power source
voltage is inferior to 50% of the regular
voltage. Test it again with the correct
voltage;
Check if the controller has a peculiar
smell and replace it;
Check that the motor cable is connected
correctly and reconnect it.
Display LED
values blink
A. The communication cable isn't
properly connected or the cable
is broken.
Check and connect the cables properly
or replace the broken cables.
Replace the console B. Console broken cable
Display
console is
incomplete or
missing cables
A. Loose screw on the
display board
Tighten the screw
Replace the console
B. Broken system
FOUND AN AUTHORIZED POINT
If you identify any problem in your equipment, contact the Authorized Point and
request a technical visit.
Any doubt, critic or suggestion can be feita na nossa Central de Atendimento ao
Consumidor, telephone 0800 772 4080.Never try to exchange any item or any
modification of the equipment, on pain of losing the guarantee.To find the nearest
Authorized Point, access the site http://movement.com.br/assistencia-tecnicaWhen
entering the contact as an Authorized Point, it will be necessary to present a copy of the
fiscal note (for warranty services) and inform the equipment serial number.