Brudden Movement HOME LINE R1, Руководство пользователя

Страница: 90 / 147

MAINTENANCE
41
COMMON FAULT AND MAINTENANCE
Problem
and Code
Cause Solution
System
not working
A - No energy power
Connect the power cord into an outlet
and set the switch ON.
B - The Emergency Key is not in the
correct place
Change the emergency key position
C - The inverter is not properly
connected or it has a fault.
Both check and connect the inverter or
replace it.
D - Turn off
Check if the outlet is working
correctly
A - Loose emergency key Replace the Emergency Key
Treadmill
sudden
stoppage.
B - Problem in the system
Contact authorized repair points
Button
Malfunctions Broken buttons
1 - Replace buttons and cables
2 - Replace the console
E-01
A -Poor cable communication
Make sure that all connections are fully
inserted. Replace any damaged cable if
needed.
B - Broken Console
Replace the console
C - Broken Inverter
Replace the inverter
D - Broken motor
Replace the motor
A - Broken Motor Cable
or Broken Motor
Replace the motor
E-02
B - Bad motor wire connections with
the controller or bad controller.
Check and reconnect the cables
or replace the controller
A - Incorrect installation of the
light sensor
Both check and assemble it again
E-03
B - Problem on the light sensor Replace the light sensor
C - Poor connection between the
light and the controller
Check it and reconnect it
D - Poor controller
Replace the controller
E-05
A - Damaged controller
Repalce the controller
B - Damaged motor
Replace the motor
LED Display
with no
pulsation
signal
A - The sensor cable communication
is not well connected or the sensor is
broken
Both check and connect the cables again
or replace the sensor cable
B - Broken console connector Replace the console